Building Design

This page is for specifics to creating a building blueprint with the new designer.

Refer to the Designer for info on how to use the designer.

Description

The first thing to be done when designing a building is to configure the blueprint properties. The structure should be established right away, because it affects what parts can be added to the design.

In most building designs, the next thing to be done is design the building site.

Restrictions

• The site must be within 255m from the center.

• A site must pass through the center.

• A hull must surround the center point.

• Hull may not extend past the edge of the site.

• Hull cannot be higher then 1000m above the center or 100m below.

• Hull volume cannot exceed 104,000,000m³.

• Mesh do not have limits on size.

• Rooms do not have limits on size, but will cost resources.

Tips

Hull and room voids do not alter the hull volume, just the collisions.

Room voids allow for gravity, Hull voids keep the outside gravity.

For a site to be considered a field, it must have the type of field. It is natural ground by default.

Building Volume

Volume per space

Space	Volume
Arena	5000
Auditorium	1132
Battery	7.25
Storage	0.085
Generator	2265
Large Home	228
Medium Home	114
Small Home	57
Lounge	637
Office	34
Shop	91
Store	566
Field*	4000

• Field is m²

Support requirements

Planet type	Life Support M3*	Framework %	Multiplier
Airless	1	0	1
Frigid	3	5	1.053
Inferno	4	11	1.124
Sea Bottom	0.5	15	1.177
Frigid Sea	2	20	1.25
Gas Giant	3.5	25	1.334
Everywhere	4	25	1.334

• Life support is per job or home. So if you have a building with 10 lounges and 1 office, it will require 44m³ life support to be on an inferno world.

References

Info was original research performed on 12/28/2018.

Building update[1]