Port Forwarding: Difference between revisions

From Hazeron Wiki
Jump to navigation Jump to search
m (→‎Avast!: Is this better or worse? I'll have to try.)
(Moved Firewall_Settings information to its own page.)
Line 2: Line 2:


For help, see: [http://www.PortForward.com/ www.PortForward.com]
For help, see: [http://www.PortForward.com/ www.PortForward.com]
=Avast!=
The ''Avast!'' program is known to quietly cause failure of some ''Shores of Hazeron'' communications.
To configure ''Avast!'' go to Settings|Active Protection|Firewall Customize|Packet Rules.
Click Add and enter:
* '''Enabled:''' <code>true</code>
* '''Name:''' <code>SoH</code>
* '''Action:''' <code>Allow</code>
* '''Protocol:''' <code>UDP</code>
* '''Direction:''' <code>In/Out</code>
* '''Address:''' <code>*blank*</code>
* '''Local Port:''' <code>1024-65535</code>
* '''Remote Port:''' <code>16757-16783, ICMP</code>
* '''Type:''' <code>*blank*</code>
=Windows 7 Firewall=
To configure ''Windows 7 Firewall'' go to Control Panel|System and Security|Windows Firewall|Advanced Settings|Outbound Rules|New Rule.
Select Port, Press Next.
Select UDP and Specific remote ports.
Enter the range: 16757-16783, press next.
Select Allow the connection, press next.
Check Domain, Private, and Public, press next.
Give it a name, like SoH, and put "Shores of Hazeron control packets" in the description.
Press Finish.


[[Category:Computer Settings and Technical Information]]
[[Category:Computer Settings and Technical Information]]

Revision as of 19:11, 4 August 2015

The Shores of Hazeron program uses the ports 16757 to 16783 to make connections to the servers. The servers do not make connections back to the client, so you do not need to set up port forwarding. However, if you are using a firewall that blocks outgoing connections, you will need to either allow Shores of Hazeron or allow outgoing traffic on those ports.

For help, see: www.PortForward.com

Retrieved from "https://hazeron.com:443/wiki/index.php?title=Port_Forwarding&oldid=1688"