Transporter Station - Revision history

Celarious at 13:08, 12 March 2024

2024-03-12T13:08:48Z

← Older revision		Revision as of 13:08, 12 March 2024
Line 9:		Line 9:
	The '''transporter station''' operates the matter transportation equipment of a [[spacecraft]] or [[building]]. The operator uses the transporter station to select locations and to activate the [[transporter]] in send or receive mode.		The '''transporter station''' operates the matter transportation equipment of a [[spacecraft]] or [[building]]. The operator uses the transporter station to select locations and to activate the [[transporter]] in send or receive mode.

	When activated, the transporter creates a one-way portal between the transporter pads and another location. The portal that is created exists until it is entered or until it decays after about fifteen seconds. The entry portal is bright blue with particles converging toward the center. The exit portal is bright red with particles emerging from the center. When no more portals remain, the transporter ~~room~~ is deactivated and shuts off automatically.		When activated, the transporter creates a one-way portal between the transporter pads and another location. The portal that is created exists until it is entered or until it decays after about fifteen seconds. The entry portal is bright blue with particles converging toward the center. The exit portal is bright red with particles emerging from the center. When no more portals remain, the transporter is deactivated and shuts off automatically.

	The transporter station's primary display is very similar to the sensor station. Refer to the [[Sensor_Station]] page for a key to the information displayed. Display rotation and magnification is controlled using green and pink controls at the bottom right, similar to the sensor station. Declutter switches appear in a column at the right and function just like those on the sensor station.		The transporter station's primary display is very similar to the sensor station. Refer to the [[Sensor_Station]] page for a key to the information displayed. Display rotation and magnification is controlled using green and pink controls at the bottom right, similar to the sensor station. Declutter switches appear in a column at the right and function just like those on the sensor station.
Line 20:		Line 20:
	\|[[File:TransporterActive1.png\|thumb\|200px\|none\|Active transporter.]]		\|[[File:TransporterActive1.png\|thumb\|200px\|none\|Active transporter.]]
	\|}		\|}
	One portal will be created for each pad that is activated. The number of transporter pads to activate is controlled at the bottom left of the display. The maximum number that can be activated is based on the number of functioning pads in the transporter ~~room~~.		One portal will be created for each pad that is activated. The number of transporter pads to activate is controlled at the bottom left of the display. The maximum number that can be activated is based on the number of functioning pads associated with the transporter station. No portals are created if the target location is beyond transporter range.

	The transporter is activated in send or receive mode. When sending, entry portals are created on pads in the transporter room and exit portals are created at the target location. When receiving, entry portals are created at the target location and exit portals are created on pads in the transporter room~~. No portals are created if the target location is beyond transporter range~~.		The transporter is activated in send or receive mode. When sending, entry portals are created on pads in the transporter room and exit portals are created at the target location. When receiving, entry portals are created at the target location and exit portals are created on pads in the transporter room.

	The transporter is activated using buttons at the bottom center of the display. The button with blue arrows pointing inward activates the transporter in send mode. The button with red arrows pointing outward activates the transporter in receive mode. Transporter power turns on when it is activated; transporter power does not have to be on prior to activating the transporter.		The transporter is activated using buttons at the bottom center of the display. The button with blue arrows pointing inward activates the transporter in send mode. The button with red arrows pointing outward activates the transporter in receive mode. Transporter power turns on when it is activated; transporter power does not have to be on prior to activating the transporter.

	After the transport cycle is complete, transporter power is automatically turned off. The transporter console has a power switch at the top left corner. Turning on the power to the transporter ~~room~~ is only necessary when requesting a transporter-to-transporter beam-over from another spacecraft. Refer to the Transporter Protocol section below for more information. While the power is on and the transporter is inactive, the transporter room can be selected as a target for transport by any other transporter in range, even when your shields are up. Think of it as opening your door for anyone to enter.		After the transport cycle is complete, transporter power is automatically turned off. The transporter console has a power switch at the top left corner. Turning on the power to the transporter system is only necessary when requesting a transporter-to-transporter beam-over from another spacecraft. Refer to the Transporter Protocol section below for more information. While the power is on and the transporter is inactive, the transporter room can be selected as a target for transport by any other transporter in range, even when your shields are up. Think of it as opening your door for anyone to enter.

	==Mode==		==Mode==
Line 40:		Line 40:
	\| [[File:tc_PlanetModeOn.png\|50px]]		\| [[File:tc_PlanetModeOn.png\|50px]]
	\| Map Mode		\| Map Mode
	\| Transporter's target is a longitude latitude location on a map of a [[planet]].		\| Transporter's target is a longitude/latitude location on a map of a [[planet]].
	\|-		\|-
	\| [[File:tc_TransporterModeOn.png\|50px]]		\| [[File:tc_TransporterModeOn.png\|50px]]
	\| Transporter Mode		\| Transporter Mode
	\| Transporter's target is another transporter ~~room~~.		\| Transporter's target is another transporter system.
	\|-		\|-
	\| [[File:tc_SensorModeOn.png\|50px]]		\| [[File:tc_SensorModeOn.png\|50px]]
Line 52:		Line 52:

	===Map Mode===		===Map Mode===
	Map mode is used to select a longitude latitude location on a map of a [[planet]] as the [[transporter]]'s target location.		Map mode is used to select a longitude/latitude location on a map of a [[planet]] as the [[transporter]]'s target location.

	In map mode, the display shows a map projection of a planet. The [[spacecraft]] must be near a planet to use map mode. Pink areas on the map show relative [[city]] density. The position of the spacecraft is displayed as a small cross-shaped blip that alternates between black and white.		In map mode, the display shows a map projection of a planet. The [[spacecraft]] must be near a planet to use map mode. Pink areas on the map show relative [[city]] density. The position of the spacecraft is displayed as a small cross-shaped blip that alternates between black and white.
Line 69:		Line 69:
	In transporter mode, the display shows a [[sensor]] scan display. The only blips that will appear are [[spacecraft]] with a transporter that is powered on and inactive. An active transporter cannot be selected as a transport target.		In transporter mode, the display shows a [[sensor]] scan display. The only blips that will appear are [[spacecraft]] with a transporter that is powered on and inactive. An active transporter cannot be selected as a transport target.

	[[File:TransporterStation4.png\|thumb\|none\|Transporter mode example.]]		[[File:TransporterStation4.png\|thumb\|none\|Transporter mode example, with 3 pads selected.]]

	In the example above, a [[starship]] named ''Jules Verne'' is selected as the transporter's target. The ship has its shields up and it is 448 meters ahead and above the transporter operator's ship. The transporter room aboard the ''Jules Verne'' is on or it would not appear in the display.		The number of portals created is limited by the transporter with the fewest pads. The example transporter is configured to activate three pads. If the destination transporter only had two pads, only two portals would be created.

	The number of portals created is limited by the transporter ~~room~~ with the fewest pads. The example transporter is configured to activate ~~twelve~~ pads. ~~The~~ transporter ~~in the ''Jules Verne''~~ only ~~has six~~ pads~~. When the transporter is activated~~, only ~~six~~ portals ~~can~~ be created.

	===Sensor Mode===		===Sensor Mode===

Celarious at 12:54, 12 March 2024

2024-03-12T12:54:04Z

← Older revision		Revision as of 12:54, 12 March 2024
Line 1:		Line 1:
	~~{{Revision\|Still needs some updating, but should otherwise be usable. New more up-to-date images needed. Need missing button icons.}}~~
	{{Spacecraft_Module		{{Spacecraft_Module
	\| Name = Transporter Station		\| Name = Transporter Station
Line 114:		Line 113:
	# Open the standard Crew channel.		# Open the standard Crew channel.
	# Set the broadcast range to orbital (at least).		# Set the broadcast range to orbital (at least).
	# Request Transport.		# Request Transport.([[File:MsgTransport.png\|16px]])
	# Spacecraft activates transporter in receive mode if you are on the crew.		# Spacecraft activates transporter in receive mode if you are on the crew.
	# Enter the portal.		# Enter the portal.
Line 124:		Line 123:
	# Open the standard Hail channel.		# Open the standard Hail channel.
	# Set the broadcast range to orbital (at least).		# Set the broadcast range to orbital (at least).
	# Request Transport.		# Request Transport.([[File:MsgTransport.png\|16px]])
	# Station activates transporter in receive mode if it is friendly or neutral.		# Station activates transporter in receive mode if it is friendly or neutral.
	# Enter the portal.		# Enter the portal.
Line 135:		Line 134:
	# Set the broadcast range to orbital (at least).		# Set the broadcast range to orbital (at least).
	# Turn on your transporter room.		# Turn on your transporter room.
	# Request Transport.		# Request Transport.([[File:MsgTransport.png\|16px]])
	# Station activates transporter in receive mode if it is friendly or neutral.		# Station activates transporter in receive mode if it is friendly or neutral.
	# Enter the portal.		# Enter the portal.
Line 146:		Line 145:
	# Set the broadcast range to orbital (at least).		# Set the broadcast range to orbital (at least).
	# Turn on your transporter room.		# Turn on your transporter room.
	# Request Transport.		# Request Transport.([[File:MsgTransport.png\|16px]])
	# Ship activates transporter in receive mode if you are on the crew.		# Ship activates transporter in receive mode if you are on the crew.
	# Enter the portal.		# Enter the portal.

Celarious: /* Activation */ This img wasn't used so may aswell add it

2024-03-10T19:59:21Z

Activation: This img wasn't used so may aswell add it

← Older revision		Revision as of 19:59, 10 March 2024
Line 17:		Line 17:

	==Activation==		==Activation==
	[[File:TransporterActive.png\|thumb\|none\|Active transporter.]]		{\|
			\|[[File:TransporterActive.png\|thumb\|none\|Active transporter.]]
			\|[[File:TransporterActive1.png\|thumb\|200px\|none\|Active transporter.]]
			\|}
	One portal will be created for each pad that is activated. The number of transporter pads to activate is controlled at the bottom left of the display. The maximum number that can be activated is based on the number of functioning pads in the transporter room.		One portal will be created for each pad that is activated. The number of transporter pads to activate is controlled at the bottom left of the display. The maximum number that can be activated is based on the number of functioning pads in the transporter room.

Celarious at 12:17, 10 March 2024

2024-03-10T12:17:45Z

← Older revision		Revision as of 12:17, 10 March 2024
Line 3:		Line 3:
	\| Name = Transporter Station		\| Name = Transporter Station
	\| Picture = dp_TransporterConsole.png		\| Picture = dp_TransporterConsole.png
	\| Placement = ~~[[Transporter Room]]<br>limit one in each room~~		\| Placement =
	\| Mass = ~~80kg~~		\| Mass = ?
	\| Materials =		\| Materials =
	* 2 [[Electronic Part]]s
	* 1 [[Mechanical Part]]
	* 1 [[Plastic]]
	* 1 [[Computer]]
	* 1 [[Textiles]]
	\| Tools =		\| Tools =
	* [[Electricity]]
	* [[Screw Driver]]
	* [[Soldering Iron]]
	* [[Wrench]]
	* [[Glue Gun]]
	* [[Sewing Needle]]
	}}		}}
	The '''transporter station''' operates the matter transportation equipment of a [[spacecraft]] or [[building]]. The operator uses the transporter station to select locations and to activate the [[transporter]] in send or receive mode.		The '''transporter station''' operates the matter transportation equipment of a [[spacecraft]] or [[building]]. The operator uses the transporter station to select locations and to activate the [[transporter]] in send or receive mode.

Celarious: Updated a bit

2024-02-29T08:02:37Z

Updated a bit

← Older revision		Revision as of 08:02, 29 February 2024
Line 1:		Line 1:
	{{Revision\|Still needs some updating, but should otherwise be usable. New more up-to-date images needed. Need missing button icons.}}		{{Revision\|Still needs some updating, but should otherwise be usable. New more up-to-date images needed. Need missing button icons.}}

	{{Spacecraft_Module		{{Spacecraft_Module
	\| Name = Transporter Station		\| Name = Transporter Station
	\| Picture = dp_TransporterConsole.png		\| Picture = dp_TransporterConsole.png
	\| Placement = [[Transporter Room]]<br>limit one in each room		\| Placement = [[Transporter Room]]<br>limit one in each room
	~~\| TL = 7~~
	\| Mass = 80kg		\| Mass = 80kg
	\| Materials =		\| Materials =
Line 21:		Line 19:
	* [[Sewing Needle]]		* [[Sewing Needle]]
	}}		}}
			The '''transporter station''' operates the matter transportation equipment of a [[spacecraft]] or [[building]]. The operator uses the transporter station to select locations and to activate the [[transporter]] in send or receive mode.

	The transporter station operates the matter transportation equipment of a transporter room. The operator uses the transporter station to select locations and to activate the [[transporter]] in send or receive mode.		When activated, the transporter creates a one-way portal between the transporter pads and another location. The portal that is created exists until it is entered or until it decays after about fifteen seconds. The entry portal is bright blue with particles converging toward the center. The exit portal is bright red with particles emerging from the center. When no more portals remain, the transporter room is deactivated and shuts off automatically.

	When activated, the transporter creates a one-way portal between the transporter ~~room~~ and another location. The portal that is created exists until it is entered or until it decays after about fifteen seconds. The entry portal is bright blue with particles converging toward the center. The exit portal is bright red with particles emerging from the center. When no more portals remain, the transporter room is deactivated and shuts off automatically.

	The transporter station's primary display is very similar to the sensor station. Refer to the [[Sensor_Station]] page for a key to the information displayed. Display rotation and magnification is controlled using green and pink controls at the bottom right, similar to the sensor station. Declutter switches appear in a column at the right and function just like those on the sensor station.		The transporter station's primary display is very similar to the sensor station. Refer to the [[Sensor_Station]] page for a key to the information displayed. Display rotation and magnification is controlled using green and pink controls at the bottom right, similar to the sensor station. Declutter switches appear in a column at the right and function just like those on the sensor station.
Line 78:		Line 75:

	===Transporter Mode===		===Transporter Mode===
	Transporter mode is used to select another transporter ~~room~~ as the [[transporter]]'s target location. ~~Transporter rooms~~ can be selected even when the [[shield]]s of the target vessel are up.		Transporter mode is used to select another transporter as the [[transporter]]'s target location. Transporters can be selected even when the [[shield]]s of the target vessel are up.

	In transporter mode, the display shows a [[sensor]] scan display. The only blips that will appear are [[spacecraft]] with a transporter ~~room~~ that is powered on and inactive. An active transporter ~~room~~ cannot be selected as a transport target.		In transporter mode, the display shows a [[sensor]] scan display. The only blips that will appear are [[spacecraft]] with a transporter that is powered on and inactive. An active transporter cannot be selected as a transport target.

	[[File:TransporterStation4.png\|thumb\|none\|Transporter mode example.]]		[[File:TransporterStation4.png\|thumb\|none\|Transporter mode example.]]
Line 86:		Line 83:
	In the example above, a [[starship]] named ''Jules Verne'' is selected as the transporter's target. The ship has its shields up and it is 448 meters ahead and above the transporter operator's ship. The transporter room aboard the ''Jules Verne'' is on or it would not appear in the display.		In the example above, a [[starship]] named ''Jules Verne'' is selected as the transporter's target. The ship has its shields up and it is 448 meters ahead and above the transporter operator's ship. The transporter room aboard the ''Jules Verne'' is on or it would not appear in the display.

	The number of portals created is limited by the transporter room with the fewest pads. The example transporter is configured to activate twelve pads. The transporter ~~room~~ in the ''Jules Verne'' only has six pads. When the transporter is activated, only six portals can be created.		The number of portals created is limited by the transporter room with the fewest pads. The example transporter is configured to activate twelve pads. The transporter in the ''Jules Verne'' only has six pads. When the transporter is activated, only six portals can be created.

	===Sensor Mode===		===Sensor Mode===
	Sensor mode is used to select [[~~cities~~]], [[spacecraft]] or personnel as the [[transporter]]'s target locations.		Sensor mode is used to select [[building]]s, [[spacecraft]] or personnel as the [[transporter]]'s target locations.

	In sensor mode, the only blips that appear are those that can be selected as the transporter's targets.		In sensor mode, the only blips that appear are those that can be selected as the transporter's targets.

	Attempts to spacecraft with their shields up will not be shown on the display since their hulls are impervious to transporter beams.		Attempts to target [[spacecraft]] with their shields up will not be shown on the display since their hulls are impervious to transporter beams.

	The red heart button is used to toggle the display of life forms, for decluttering the display. This declutter option is not available at the [[Sensor_Station\|sensor station]] because the sensor station does not show life forms.		The red heart button is used to toggle the display of life forms, for decluttering the display. This declutter option is not available at the [[Sensor_Station\|sensor station]] because the sensor station does not show life forms.
Line 104:		Line 101:

	[[File:TransporterStation2.png\|thumb\|none\|]]		[[File:TransporterStation2.png\|thumb\|none\|]]

	~~When a city is selected as the transport target, the portals appear at the [[Town_Square\|town square]].~~

	==Transporter Protocol==		==Transporter Protocol==

Deantwo: Corrected picture.

2017-08-12T17:11:57Z

Corrected picture.

← Older revision		Revision as of 17:11, 12 August 2017
Line 3:		Line 3:
	{{Spacecraft_Module		{{Spacecraft_Module
	\| Name = Transporter Station		\| Name = Transporter Station
	\| Picture = ~~Transporter_Station~~.png		\| Picture = dp_TransporterConsole.png
	\| Placement = [[Transporter Room]]<br>limit one in each room		\| Placement = [[Transporter Room]]<br>limit one in each room
	\| TL = 7		\| TL = 7

Deantwo: Updated to wiki standard.

2015-12-10T03:41:18Z

Updated to wiki standard.

Show changes

Deantwo: Created page with "{{Revision|Images needed}} {| style="float: right;" class="wikitable" !| Transporter Station |- | align="center" | 75px
|- !|Information..."

2015-07-09T18:41:02Z

Created page with "{{Revision|Images needed}} {| style="float: right;" class="wikitable" !| Transporter Station |- | align="center" | 75px |- !|Information..."

New page

{{Revision|Images needed}}

{| style="float: right;" class="wikitable"
!| Transporter Station
|-
| align="center" | [[File:Transporter Console.png|75px]] 
|-
!|Information
|-
|
* Mass per Module: xxx
|-
|}
==Introduction==

The transporter station operates the matter transportation equipment of a transporter room. The operator uses the transporter station to select locations and to activate the transporter in send or receive mode.

When activated, the transporter creates a one-way portal between the transporter room and another location. The portal that is created exists until it is entered or until it decays after about fifteen seconds. The entry portal is bright blue with particles converging toward the center. The exit portal is bright red with particles emerging from the center. When no more portals remain, the transporter room is deactivated and shuts off automatically.

The transporter station's primary display is very similar to the sensor station. Refer to the Sensor Station page for a key to the information displayed. Display rotation and magnification is controlled using green and pink controls at the bottom right, similar to the sensor station. Declutter switches appear in a column at the right and function just like those on the sensor station.

[[Controls]] are activated by clicking on the console using the hand cursor. Controls also have corresponding keyboard equivalents. Help about using the hand cursor and a table showing the key commands for this station can be found on the Keyboard and Mouse Controls page.

<center>
{| style="class="wikitable"
|-
| align="center" | [[File:TransporterActive.png]] 
|-
|}</center>

==Mode==
The transporter offers three different modes for selecting a target location. At the left side below the power indicator light is a column of three buttons for choosing the target selection mode.

{| class="wikitable"
|-
| [[File:tc_PlanetModeOn.png|50px]]|| Map Mode || Transport target is a longitude latitude location on a map of a planet.
|-
| [[File:tc_TransporterModeOn.png|50px]]|| Transporter Mode || Transport target is another transporter room.
|-
| [[File:tc_SensorModeOn.png|50px]]|| Sensor Mode|| Transport target is an object detected by sensors.
|-
|}

One portal will be created for each pad that is activated. The number of transporter pads to activate is controlled at the bottom left of the display. The maximum number that can be activated is based on the number of functioning pads in the transporter room.

The transporter is activated in send or receive mode. When sending, entry portals are created on pads in the transporter room and exit portals are created at the target location. When receiving, entry portals are created at the target location and exit portals are created on pads in the transporter room. No portals are created if the target location is beyond transporter range.

The transporter is activated using buttons at the bottom center of the display. The button with blue arrows pointing inward activates the transporter in send mode. The button with red arrows pointing outward activates the transporter in receive mode. Transporter power turns on when it is activated; transporter power does not have to be on prior to activating the transporter.

After the transport cycle is complete, transporter power is automatically turned off. The transporter console has a power switch at the top left corner. Turning on the power to the transporter room is only necessary when requesting a transporter-to-transporter beam-over from another spacecraft. Refer to the Transporter Protocol section below for more information. While the power is on and the transporter is inactive, the transporter room can be selected as a target for transport by any other transporter in range, even when your shields are up. Think of it as opening your door for anyone to enter.

===Map Mode===
Map mode is used to select a longitude latitude location on a map of a planet as the transport target location.

In map mode, the display shows a map projection of a planet. The spacecraft must be near a planet to use map mode. Pink areas on the map show relative city density. The position of the spacecraft is displayed as a small cross-shaped blip that alternates between black and white.
<center>
{| style="class="wikitable"
|-
| align="center" | [[File:TransporterStation3.png]] 
|-
|}</center>

The transport target is the map location aligned with the crosshair at the center of the display. Map locations are selected by panning the display or by clicking a map location using the hand cursor. The transporter will not activate if the location is beyond transporter range.

The rosette of green arrows is used to pan the map display. The center green button restores the default pan location, centered on the planet map.

The pink arrows are used to increase and decrease the map display magnification. The center pink button restores the default magnification, which fills the display with the map of the planet.

===Transporter Mode===
Transporter mode is used to select another transporter room as the transport target location. Transporter rooms can be selected even when the shields of the target vessel are up.

In transporter mode, the display shows a sensor scan display. The only blips that will appear are spacecraft with a transporter room that is powered on and inactive. An active transporter room cannot be selected as a transport target.

<center>
{| style="class="wikitable"
|-
| align="center" | [[File:TransporterStation4.png]] 
|-
|}</center>

In the example above, a starship named Jules Verne is selected as the transport target. The ship has its shields up and it is 448 meters ahead and above the transporter operator's ship. The transporter room aboard the Jules Verne is on or it would not appear in the display.

The number of portals created is limited by the transporter room with the fewest pads. The example transporter is configured to activate twelve pads. The transporter room in the Jules Verne only has six pads. When the transporter is activated, only six portals can be created.

===Sensor Mode===
Sensor mode is used to select cities, spacecraft and personnel as transport target locations.

In sensor mode, the only blips that appear are those that can be selected as transport targets. Therefore, spacecraft with their shields up will not be shown on the display since their hulls are impervious to transporter beams.

The red heart button is used to toggle the display of life forms, for decluttering the display. This declutter option is not available at the sensor station because the sensor station does not show life forms.

<center>
{| style="class="wikitable"
|-
| align="center" | [[File:TransporterStation.png]] 
|-
|}</center>
When a spacecraft is selected as the transport target, the portals appear at a randomly selected void location within the hull. Portals that are blocked by equipment or hull walls are not created.

When a person is selected as the transport target, the portals appear near their location, usually within twenty feet. The selected person can be aboard a spacecraft or on a planet's surface. Personnel floating in space cannot be transported.

<center>
{| style="class="wikitable"
|-
| align="center" | [[File:TransporterStation2.png]] 
|-
|}</center>

When a city is selected as the transport target, the portals appear at the town square.

==Transporter Protocol==
Safe and secure transporter operation dictates a certain usage protocol. Transporter protocol insures secure transport between vessels with their shields up. Transporter protocol also enables personnel to safely beam down to the surface of a planet, leaving their ship unattended in orbit with shields up and doors locked.

The following scenarios illustrate transporter usage protocol. All spacecraft in these examples have shields up, to prevent transporter intrusion, and hull doors closed and locked, for physical security. In all cases, the spacecraft involved remain secure after the transporter is used.

{| class="wikitable"
|-
| Beam Down to Planet from Spacecraft|| Select a transport target using your transporter station.
Activate the transporter in send mode.
Enter the portal.
Transporter shuts off.
|-
| Beam Up to Your Spacecraft from Planet||
Open the Comm (F3) window.
Open the standard Crew channel.
Set the broadcast range to orbital (at least).
Request Transport.
Spacecraft activates transporter in receive mode if you are on the crew.
Enter the portal.
Transporter shuts off.
|-
| Beam Up to Station from Planet|| Open the Comm (F3) window.
Open the standard Hail channel.
Set the broadcast range to orbital (at least).
Request Transport.
Station activates transporter in receive mode if it is friendly or neutral.
Enter the portal.
Transporter shuts off.
|-
| Beam Over to Station from Spacecraft|| Open the Comm (F3) window.
Open the standard Hail channel.
Set the broadcast range to orbital (at least).
Turn on your transporter room.
Request Transport.
Station activates transporter in receive mode if it is friendly or neutral.
Enter the portal.
Transporters shut off.
|-
| Beam Over to Your Spacecraft from Spacecraft||
Open the Comm (F3) window.
Open the standard Crew channel.
Set the broadcast range to orbital (at least).
Turn on your transporter room.
Request Transport.
Ship activates transporter in receive mode if you are on the crew.
Enter the portal.
Transporters shut off.
|-
| Beam Over to Manned Spacecraft from Spacecraft|| Turn on your transporter room.
Request Transport.
Other person selects your transporter room in Transporter mode.
Other person activates transporter in receive mode.
Enter the portal.
Transporters shut off.
|-
| Beam Up to Manned Spacecraft from Planet|| Request Transport.
Other person selects your personal blip in Sensor mode.
Other person activates transporter in receive mode.
Enter the portal.
Transporter shuts off.
|-
|}

[[Category:Consoles]]